Water Jet Ejectors

Water ejectors are vacuum pumps, driven by a high pressure water or steam. They use kinetic energy of the driving medium to suck in gases, vapours or alternative liquids then discharge the resultant mixture against a counter pressure. Turbine Works manufactures water jet ejectors for industrial and marine functions.

Ejectors are easy in design and reliable operative since they do not have movable elements like standard pumps. Major elements of an ejector are an inlet casing, nozzle, mixing chamber and diffuser. Since there aren't any moving elements, no lubrication is necessary and maintenance is nominal. Ejectors are self-priming merely activated by simply turning on the flow of the driving water.

Crystaltcs is manufacturing Water Jet Ejectors & this ejector is using Water instred of Steam. Motive fluid can be some other liquid also. Normal range for a Water Jet Ejector is from atmosphere to 45 mm hg abs depending upon the water temperature. These water jet ejectors are generally employed for lifting, mixing, emptying out liquid or slurries from tanks & pits. Water jet ejector convert water into a motive force.

Water jet ejector uses water as driving force. The induced fluid is entrained and condensates are condensed. The non condensed gases are then compressed within the diffuser& discharged into a constant level water sea tank against air pressure. Maximum absolute pressure obtained by these sorts of Ejectors depends on the temperature of water or motivating fluid. Generally absolute pressure at shut off nearly equals to the vapour pressure of the operating liquid at operational temperature. These units are most economical where condensable vapours are to be handled.

Crystal TCS Pvt. Ltd.

For more information Give us call at: +91 253 2501600

E-mail : info@crystaltcs.com

Visit us: http://www.crystaltcs.com/water-treatment.php

Comments

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process. Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception. Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du

CrystalTCS

Search This Blog