CrystalTCS

Liquid jet vacuum ejectors are liquid gas ejectors specially developed to create and maintain vacuum in a wide range of applications. Liquid jet vacuum ejectors use the energy in the pumped liquid to absorb air / vapor and create a vacuum. It can work with a wide range of gases and liquids. In most applications the liquid jet vacuum ejector is driven by pumped water or water based solution. Liquid jet vacuum ejectors offer significant advantages over liquid vacuum pumps and dry vacuum pumps. Most importantly, the liquid jet vacuum ejector tolerates liquid droplets entering the ejector with adsorbed gases, a common problem found in most applications. Advantages : The standardized model range ensures low cost and fast delivery times. Effective performance in a wide range of applications. Range distributed in total 8 sizes: Large number. The size ensures optimal selection No moving parts - ensures excellent reliability, zero maintenance and very long operating life. Silent operation. Easi

Crystal TCS Pvt. Ltd. has committed itself to continuous efforts for technical excellence and has focused on providing quality products and Liquid Eductor services.Liquid actuator / jet pump eliminates the use of slurry mixing tanks, reduces power consumption and reduces footprint on the floor. The resulting slurry can be transferred horizontally and vertically with a few pounds of pressure at the injection point at the end of the process. Liquid jet gas ejectors are based on the jet venturi principle and use high speed liquid jets to enter the air / vapor and compress it to the required discharge pressures. The maximum available vacuum depends on the vapor pressure of the motive liquid, while the maximum possible discharge pressure depends on the pressure of the motive liquid. Excellent features of liquid educator : Low cost - the units are smaller in terms of the work they do and therefore lower in cost. They do the same thing over and over again to help. There are no moving parts -

Jet Mixers or Tank Mixing Ejectors are a specially adapted ejector technology for tank stirring, agitation of tank contents and for Introduction of chemicals & solid powders in the tank. Storage tanks in the Industry typically need the following add-ons for effective functioning: Agitation and Stirring: If the tank contents have a sludge forming tendency, the tank contents have to be stirred and agitated continuously to avoid sludge formation and sludge settling. Mixing: In process tanks, the contents have to be intimately mixed for carrying out effective reactions. Chemical & Powder introduction to support the ongoing reactions Heating & Cooling of the Tank contents. Jet mixers or Tank Mixing Ejector facilitate all the above requirements through one single installation. Superlative Performance Characteristics Ability to handle a wide range of Liquid Temperatures, Densities and Viscosities Provides an even mixing and temperature regulation of the tank contents and prevents

Crystal TCSPvt. Ltd. has tantalum heat exchangers that offer exceptionally high corrosion resistance at extremely low cost. The combined advantages of low cost, longevity and minimal maintenance requirements result in lower overall cost compared to heat exchangers made from high quality alloy, graphite, silicon or glass. High chemical or corrosion resistance and strong design reduces service requirements. If the heat exchanger is operating on fouling duty, the only maintenance required is cleaning the site. Extremely turbulent flow helps reduce fouling and makes spot cleaning procedures more effective. For heating with saturated steam, metal heaters have several advantages: High operational security Small exchange areas due to high thermal conductivity There is no restriction on vapor pressure, as the appearance will match the duty Construction, especially large units, includes all the options required for operational safety: High alloy stainless steels Hastelloy Titanium Tantalum The