CrystalTCS

  The self-priming nature and high suction capacity of our Ballast Eductors makes Ballasting easier while the Capacity to provide high suction lifts helps in stripping the bilges to the last liter with the help of our Bilge Eductors. Our Liquid jet Vacuum Eductors ensure consistent degassing and help to avoid an escape of any harmful and toxic gases from the storage tanks. We manufacture Bilge Eductors with the highest quality standards and follow stringent inspection procedures. Our Eductors adhere to global shipping standards such as ABS, DNV and others. The stripping Eductors (ejectors) are used to pump out/strip ballast, bilge, cargo or other spaces in a Ship that need to be pumped out on a regular basis. Crystal TCS is specialised in the manufacturing of Bilge Eductor with the highest quality standards and follows stringent inspection procedures. Bilge ejectors are supplied with high pressure sea water from an associated pump. The diameters of bilge main and branch pipes, are f

  Tank Mixing Eductors are operated by a flow of pressure liquid through the nozzle. The motive liquid entrains suction liquid, the two are mixed intimately in the venturi, and the mixture is discharged into the tank. Pressure liquid can be taken from the tank by means of a pump or it can be a new liquid. Jet Mixers or Tank Mixing Ejectors are a specially adapted ejector technology for tank stirring, agitation of tank contents and for Introduction of chemicals & solid powders in the tank Storage tanks in the Industry typically need the following add-ons for effective functioning: Agitation and Stirring: If the tank contents have a sludge forming tendency, the tank contents have to be stirred and agitated continuously to avoid sludge formation and sludge settling. Mixing: In process tanks, the contents have to be intimately mixed for carrying out effective reactions. Chemical & Powder introduction to support the ongoing reactions Heating & Cooling of the Tank contents. Jet

We manufacture and supply custom designed Liquid jet liquid ejectors for Liquid dosing applications.The Liquid jet Ejector creates metered flows for a precise dosing operation. Custom design enables accommodating the exact required flow and dosing pressure at discharge. Liquid Jet Ejectors are based on the jet venturi principle and utilize high velocity liquid jets to suck liquid and pump it to the required discharge pressures. The maximum attainable vacuum is dependent on the vapour pressure of the Motive liquid while the maximum possible discharge pressure is dependent on the Pressure of Motive Liquid. Our Liquid Jet Ejectors are used to suck liquids under vacuum and also to pump liquid to higher than atmospheric pressures. Our liquid chemical dosing systems operate using our Liquid Jet Pump technology. These Ejectors entrain liquid chemicals by using a high-pressure liquid motive. It is often the case that a liquid motive is already available on-site from a pre-existing process. Af

Eductors are widely used in the Shipbuilding industry on account of their reliable performance and maintenance free operation. We manufacture and supply Ballast Eductors specially adapted for the needs of the shipbuilding Industry. Our Eductors manufactured in Bronze and Duplex Steels provide exhaustive resistance against Sea water corrosion and ensure a long operating life. Whether it’s de-ballasting the ballast tanks or stripping the Ballast or degassing the tanks, Our Eductors always deliver on performance. Ejector is a device which effectively utilizes the pressure energy in a flowing fluid to evacuate,  entrap/suck other fluid and discharge it to a point as needed in a system. Ejector technology is applied to design stripping ejectors which is  very widely  employed in ships / cargo vessels / boats  for a variety of stripping applications. Ballast Eductors are interconnected so that each can perform the other's function in an emergency, i.e. a ballast pump could be used to pu