Skip to main content

Liquid Jet Liquid ejectors are Use for Liquid Dosing Ejectors Applications

We manufacture and supply custom designed Liquid jet liquid ejectors for Liquid dosing applications.The Liquid jet Ejector creates metered flows for a precise dosing operation. Custom design enables accommodating the exact required flow and dosing pressure at discharge. Liquid Jet Ejectors are based on the jet venturi principle and utilize high velocity liquid jets to suck liquid and pump it to the required discharge pressures. The maximum attainable vacuum is dependent on the vapour pressure of the Motive liquid while the maximum possible discharge pressure is dependent on the Pressure of Motive Liquid. Our Liquid Jet Ejectors are used to suck liquids under vacuum and also to pump liquid to higher than atmospheric pressures.

Our liquid chemical dosing systems operate using our Liquid Jet Pump technology. These Ejectors entrain liquid chemicals by using a high-pressure liquid motive. It is often the case that a liquid motive is already available on-site from a pre-existing process. After entraining the desired chemical, the liquid motive and chemical are mixed thoroughly and discharged from the Ejector at pressure. If there is a requirement to dose multiple chemicals simultaneously, we can provide two ports for chemical inputs.


Liquid Jet Ejectors


Other popular applications for liquid dosing pumps are the food, cosmetic and manufacturing industries where ingredients need to be added into a mixture on a production line. As accuracy is a key aspect of a liquid metering pump, a smooth, constant and low pulsating flow is required making pumps such as piston, progressive cavity and flexible impeller pumps suitable. 

Advantages of our Liquid Dosing Ejectors

  • High precision metered flows

  • Low NPSH Requirement

  • Ability to deliver high suction lifts

  • No Moving Parts – Reliable performance and very low maintenance requirements.

  • Long Operating life.

Applications

  • Chemical Dosing

  • Acid and Caustic Ejector


Crystal TCS is a niche technology-based engineering firm working in the field of Ejector based systems. Understanding the needs of the customer along with Technology and Manufacturing excellence are our prime assets when it comes to satisfying the diverse demands of the industry. A custom design enables accommodating the exact required flow and dosing pressure at discharge. The Liquid jet Ejector creates metered flows for a precise dosing operation. Depending on your specific application we can manufacture systems to dose liquids, solids and gases. We also design combination systems for combined dosing and heating.


Looking for a safe, reliable Liquid jet Ejector for Liquid Dosing Ejectors? Crystal TCS Pvt. Ltd. manufactures and supplies custom designed Liquid jet ejectors for Liquid dosing applications and we have manufacturers and suppliers in Nashik, Pune, Mumbai, Ahmedabad and Surat.



Crystal TCS Pvt. Ltd.

Contact us: 02532501600

Visit us: https://www.crystaltcs.com/liquid-dosing-ejectors.php
Labels:
Location: Mumbai, Maharashtra, India

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more