Jet Mixers - Crystal Tcs

Jet Mixers or Tank Mixing Ejectors are a specially adapted ejector technology for tank stirring, agitation of tank contents and for Introduction of chemicals & solid powders in the tank.

Storage tanks in the Industry typically need the following add-ons for effective functioning:

Agitation and Stirring: If the tank contents have a sludge forming tendency, the tank contents have to be stirred and agitated continuously to avoid sludge formation and sludge settling.
Mixing: In process tanks, the contents have to be intimately mixed for carrying out effective reactions.
Chemical & Powder introduction to support the ongoing reactions
Heating & Cooling of the Tank contents.

Jet mixers or Tank Mixing Ejector facilitate all the above requirements through one single installation.

Superlative Performance Characteristics

Ability to handle a wide range of Liquid Temperatures, Densities and Viscosities
Provides an even mixing and temperature regulation of the tank contents and prevents sludge formation and settling.
Additional capability to introduce Chemicals & Powders in the tank through the same setup.

Advantages of our Jet Mixers / Tank Mixing Ejectors:

Strong Corrosion resistance.
Ease of installation due to its Compact size and only 1 connection point
No Moving Parts – Reliable performance and very low maintenance requirements
Long Operating life
Zero Vibrations and Silent Operation

Jet Mixers or Tank Mixing Ejectors are based on the Jet-Venturi effect and transfer the kinetic energy of high velocity liquid jets to the tank contents for agitation and mixing the tank contents.

The Mixers convert the high pressure motive liquid into a high velocity jet in the nozzle. The conversion of high pressure motive liquid into a high velocity jet creates a low pressure zone inside the mixer.

Visit Us: https://www.crystaltcs.com/jet-mixers.php

Comments

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process. Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception. Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du

CrystalTCS

Search This Blog