Tantalum Heat Exchangers for Corrosive Applications

The high corrosion resistance of Exotic metals and Special Steel combined with their high heat conductivity and manufacturing friendly properties make them ideally suitable for use in Heat exchangers.

We deal in various types of Heat Exchangers such as Shell and tube Heat Exchangers, Bayonet Type Heat Exchangers, Hairpin Exchangers.

Our Heat Exchangers are used in the Chemical and process Industry and have ensured a long and stress free operation for our clients.

We also supply custom made Heating / Cooling Coils to satisfy small heat duties and tank Heating Applications.

Tantalum Heat Exchangers for Ultimate Corrosion resistance:

The ability of tantalum to resist severe corrosion makes it an ideal choice for heat exchangers with highly corrosive process fluids.

Severe Corrosive environments involved in heating /boiling of corrosive acids in tanks can be comfortably handled by Tantalum Bayonet Heaters.

Tantalum Heat Exchangers are now emerging as a fulfilling solution towards the needs of the pickling process.

Tantalum’s robust resistance to HCL and H2SO4 corrosion along with its ability to withstand high temperatures in continuous operation has minimized downtime and nullified stoppages in pickling lines due to Heat exchanger problems.

These Heat exchangers are Shell and tube Type and the use of Carbon Steel for shell material and FRP chambers for Acid Inlet and Outlet has made Tantalum Heat exchangers a cost- effective solution for pickling.

Crystaltcs Tantalum Heat Exchangers are now emerging as a fulfilling solution towards the needs of the pickling process.

Crystal TCS Pvt. Ltd.

Give us call if you have need for unique Tantalum equipment at: +91 253 2501600

Visit us: http://www.crystaltcs.com/heat-exchangers-for-corrosive-applications.php

Comments

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process. Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception. Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du

CrystalTCS

Search This Blog