Skip to main content

Flare Gas Recovery Systems in India

The safe and pressure reducing system in oil and gas refineries as well as petrochemical complexes is a headline that is the last section of the flared stack. In this system all the abundant gases are collected and sent to the combustible stack of combustion. Most of these gas mixtures are at high temperatures and in some cases they can also be used as a crude material for different units and it is clear that burning this mixture of gases in a flammable stack can cause environmental problems such as air and noise pollution.

A flare gas recovery system is a special compression bundle, which means to recover and reproduce gases and emissions, such as methane / LPG and sulfur dioxide that will normally be burned whole in a combustible manner and the key to safe operation of refineries and petrochemical facilities, this method involves capturing gas from a flare knock-out container and applying pressure using a liquid ring compressor. The modified gas can be reused as a refinery feedstock or in a refueling facility for regeneration.

Advantages:

        1)      Low emissions: Recovering waste hydrocarbons helps reduce the amount of toxic gases, for example, hydrogen sulfide (H2S), which are burned and discharged into the atmosphere during the combustion process.

        2)      Reduced operating costs: Refineries can reuse the recovered gas, mainly made out of low molecular weight hydrocarbons (LPG), which reduces the cost of fuel gas for the facility and this is done by reducing greenhouse gas emissions.

        3)      Social and Environmental Responsibility: By reducing the C-2 emissions generated by facilities, organizations meet natural guidelines, but additionally demonstrate a mindset and promise to keep social responsibilities and create harmony in the occupied network.

        4)      Near zero flare emission

        5)      Improved community relations

        6)      Gas recovered for facility fuel gas

        7)      Reduced utility steam usage

        8)      Installation facility

Flare gas recovery is performed by re-compression, for example, for the recovery of enhanced oil or by re-injection into the main process. This increases costs but does not add directly to income. We believe it is possible to use a lean and mean process train to convert flammable gas into profitable products instead of waste.

Crystal TCS Pvt. Ltd. Promises to constantly strive for technical excellence and places great emphasis on providing quality products and services.

At Crystal TCS we have taken a principle-based approach to establishing ejector efficiency in flared gas recovery systems and developed designs based on the basic principles of thermodynamics and fluid flow dynamics, and we build flare gas recovery systems in a wide range of material and made from carbon steel, stainless steels and histories according to application.



Labels:

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more