Loop Reactor in India

Crystal TCS Pvt. Ltd. is a company established in 2012 based in Nashik, Maharashtra, India and Liquid jet gas ejector jets are based on the Venturi principle and use high velocity liquid jets to enter the air / vapor and compress it to suppress the required discharge. The rate and time of liquid-gas reaction depends on the area of the gas-liquid reaction. Intended liquid and absorbed gas flows are mixed together as our liquid jet gas ejector passes through the ejector. This intermediate mixture increases the gas-liquid interstitial area and ensures a higher mass transfer rate.

When manufactured accordingly, the liquid jet gas ejector is very useful for bringing about such reactions and is commonly known as the venturi loop reactor or loop reactor and the maximum attainable vacuum motive depends on the vapor pressure of the liquid, while the maximum discharge pressure depends on the pressure of the motive liquid or reactions required to bring high pressure are also easily handled by these ejectors.

Advantages

1) Ability to achieve very high reaction rates.

2) Ability to handle reactions comfortably at high pressures

3) Excellent gas scrubbing features

4) No moving parts - requires reliable performance and minimal maintenance

5) Long operating life

6) Silent operation

7) Compact size

8) Compatible with hazardous and flammable environments

9) Design and construction according to ASME, PED, AD 2000 standards

10) U-Stamp and CE Marking Certificate (if required)

The loop reactors are emerging as efficient in applications that require uniform or defined mixing or intense dispersion without mechanical movement and therefore simplify operation.

The ability of our liquid jet gas ejector to drive the gas pressure also eliminates the need for any additional equipment to deliver the gas and only the energy required for the liquid pressure requirement.

Comments

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process. Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception. Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du

CrystalTCS

Search This Blog