Skip to main content

Liquid Vacuum Pump

Crystal TCS Pvt. Ltd. is a leading manufacturer or supplier of specialized liquid vacuum pumps. A rotating liquid vacuum pump is used as a positive displacement vacuum pump but it can be used as a gas compressor for gas atmospheric pressure. Water sealing is while acting as a compressing in the pumping. Vacuum pumps are classified according to their operating pressure range or accordingly classified as a primary pump, booster pump & secondary pump.

Application:

  1. Vacuum process

  2. Gas exhaust.

  3. Fluid degassing.

  4. Air injection into liquid tanks.

  5. Gas micro-accumulation.

The vacuum pump is a pump that moves air in or out of others or sometimes it removes gas from one area, leaving a partial vacuum behind at other times & a vacuum pump removes water from one part of the basement to another. Vacuum pumps are used in industrial settings to make vacuum tubes & electric lamps and to process semiconductors, they can also create vacuums that can then be used to power a piece of equipment.

Liquid jet vacuum ejectors use energy in pumped liquids to absorb gas/vapor and create a vacuum & it can operate with a wide range of gases or liquids or in many applications & liquid jet vacuum ejector pumps are supported by water-based solutions. Liquid jet vacuum ejectors offer great advantages over liquid ring vacuum pumps & dry vacuum pumps.

Contact us: 02532501600

Visit us: http://crystaltcs.com/liquid-jet-vacuum-ejector.php
Labels:

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more