Skip to main content

Liquid Eductor - Crystal Tcs

Crystal TCS Pvt. Ltd. has committed itself to continuous efforts for technological excellence and has focused on providing quality products and Liquid Eductor services. Liquid eductor / jet pump eliminates the use of slurry mixing tanks, reduces power consumption and reduces footprint on the floor. The resulting slurry can be transferred horizontally and vertically with a few pounds of pressure at the injection point at the end of the process.

Liquid ejector enables the lifting, lowering, and pumping of low pressure fluids using high pressure intended fluids. The high-pressure objective fluid enters the teacher's objective orbit through the convection motive nozzle. In the injector nozzle, the pressure energy of the motive liquid eductor is converted into a high velocity jet. The motion contained in the motive liquid is transferred to the suction liquid enabling LIFT, penetration and mixing.

Excellent features of liquid educator

  1. Low cost - The units are smaller in terms of the work they do and the cost is lower accordingly. They do the same thing for constant or continuous help.

  2. There are no moving parts - Educators are very basic and solid. Basic Educator has no moving parts to insert or break. When equipped with additional objects, for example, shaft control, snap valves, glide components, they need little consideration, only occasional review and support is required.

  3. Corrosion and Incense Resistant - They can be made from practically any functional material or coated with corrosion-resistant material, making the liquid adhesives highly resistant to the action of the treated materials or the environment in which they are located.

  4. Safe - Teachers can be used in hazardous areas where electrically operated alternatives may require high cost explosion proofing.

  5. Versatile - Various piping systems of action grants adapted to natural conditions. Different types of teachers can disinfect granular solids, semi-solids and slurries.

  6. Automatic control - Units for automatic control can be adjusted by the methods of weight fluid controlled shaft or snap-valve and float arrangement.

  7. Easy to install - connections can be made to suit your channeling needs. Units require less space and are light in weight on a regular basis so that they can be reinforced with attached funneling.

Liquid educators rely on jet venturi standards and use high speed liquid jets to enter the gasses / vapors and compress them to the required release pressure. We supply liquid eductor or liquid jet gas ejectors for both vacuum and above atmospheric gas compression applications. Liquid eductors use water or other liquids under pressure as a catalytic liquid and operate on a venturi principle to mix dry chemicals into the slurry.

Liquid ejector / jet pump eliminates slurry mixing tank usage, reduces power consumption and reduces floor impression. The resulting slurry ejector can be transferred horizontally and vertically at a pressure of a few pounds at the processing and injection point.

Contact us: +912532501600

Visit us: https://www.crystaltcs.com/liquid-jet-gas-ejectors.php
Labels:

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more