Quality Tantalum Heat Exchangers

Tantalum is the maximum corrosion-resistant steel in not unusual place use today. It is inert to almost all natural and inorganic compounds. Tantalum’s corrosion resistance may be just like glass. Tantalum is regularly used for the manufacture of Dip Tubes, Piping and Overhead Condensers.

Tantalum heat exchangers are utilized in ultra-corrosive and oxidizing applications, as an example with focused sulfuric acid, nitric acid, loose chlorine, or loose bromine. They also are broadly used as vapor condensers in multipurpose satisfactory chemical and pharmaceutical applications.

Characteristics of tantalum heat exchangers:

Fixed tube sheet BEM Shell and Tube Exchangers
Bayonet designs for reboiler applications
Immersion coils for tank heating or cooling
Seamless or welded Tantalum tubing
Loose covered tube sheets, completely drainable flush weld layout for pharmaceutical duty
Explosion clad carbon metal heads for terribly excessive stress applications

Shell and tube and shell and tube heat exchangers solve most of the problems inherent in the different substances of construction. It isn't always brittle and could now no longer crack like graphite. TITAN’s Heat Exchangers are fully-welded and could now no longer leak like ceramic Heat Exchangers counting on O-rings.

For more details give us call at: +91 2532941600

Visit us:

http://www.crystaltcs.com/heat-exchangers-for-corrosive-applications.php

Comments

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process. Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception. Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du

CrystalTCS

Search This Blog