Skip to main content

Jet Mixers

 The Jet Mixers structures are an extraordinarily turbulent submerged mixer technology. Jet blending is an extraordinarily green approach to distribute blending strength at the same time as minimizing horsepower requirements.

Each Jet Mixer nozzle consists of liquid nozzles nested together. The primary flow is usually provided by either a dry-pit or submersible pump that draws suction from the tank being combined. The number one go with the drift is pumped via the inner mixing jet into the outer mixing jet, creating an education effect and introducing extra circulation through the three entertainment holes in the outer mixing jet. The combined flows are combined in the outer mixing jet and jetted out into the bulk fluid as a homogeneous, high-velocity liquid plume. Velocity gradients in the liquid plume entrain extra liquid re-circulation in the bulk fluid.



Jet Mixers /Jet Mixing Advantages :-

  • Long Life 

  • Highly Efficient 

  • Low Capital Cost Reduced Installation Cost 

  • No In-Tank Maintenance Items 

  • Superior Corrosion and Abrasion Resistant Materials of Construction


Jet Mixers /Jet Mixing Applications:-

  • Flash Mixing

  • Equalization

  • Liquid / Liquid Blending

  • Solids Suspension

  • Neutralization

We provide Jet Mixers systems throughout many industries and applications. A precise and key advantage of jet mixing—which operates based on the eductor principle—is that there are no moving or rotating components within the tank that is being mixed, thereby allowing for much easier operation and maintenance (O&M) than other types of mixers or agitators. 


Crystal Pvt.Ltd. Process designs and manufactures a complete variety of Tank Jet Mixers and entire Tank Jet Mixing Systems for the process industries. 


Contact Us : +91 253 2941600 

Visit Us: https://www.crystaltcs.com/jet-mixers.php




Labels:
Location: Nashik, Maharashtra, India

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more