Skip to main content

Tantalum heat exchangers bring enduring benefits


Tantalum heat exchangers bring enduring benefits

Typically, heat exchangers are fabricated from steel, tantalum and other metals, glass or graphite. However, when dealing with diluted H2SO4(sulfuric acid), HCI(hydrochloric acid), H3PO4(phosphoric acid) and HNO3(nitric acid), construction materials list can be tantalum, fluoropolymers, glass and graphite.
Along with how well they handle corrosive H2SO4(sulfuric acid), HCI(hydrochloric acid), H3PO4(phosphoric acid) and HNO3(nitric acid) , these construction materials will be highly influence by variations in-temp, concentration level or the pH of the process stream. Also, some materials are more sensible to thermal and mechanical shock. Specific applications have their own set of characteristics process that can substantially affect different materials. Due to high level of corrosion, metallic substances are not suitable for acid production and further concentrated. So tantalum is the first choice for heat exchangers for sulphuric acid reclamation and concentration in the chemical industry. As Tantalum is the most corrosion resistant, used for construction material today in heat exchangers. Non metal materials, glass or graphite are often separated due to their own properties, for eg, In pharma industry where the very much cleanliness is required.



CrystalTCS have tantalum heat exchangers that offer the exceptionally high corrosion resistance at a much lower cost. The combined benefits of lower cost, long lifetime and minimum maintenance requirements result in consequently lower total cost compared to heat exchangers made of high-grade alloys, graphite, silicon or glass.
The high chemical or corrosion resistance and robust design minimize the service needs. The only required maintenance is a cleaning in place procedure if the heat exchanger is operating in a fouling duty. The highly turbulent flow helps reduce fouling and makes cleaning-in-place procedures more effective. 
The crystaltcs tantalum heat exchangers have high mechanical stability and their robust design gives them much more resistance to thermal shock than glass, silicon carbide and graphite heat exchangers.

Tantalum Heat Exchangers - incomparably affordable and convenient within a wide range

The tantalum range has been specifically developed for use with hot, highly corrosive chemicals. The tantalum surface allows heat exchangers to be used with most corrosive media at temperatures up to 437 degrees Fahrenheit. Unlike many high-grade alloys, they can be used with mixed media and at variable concentrations.
The high corrosion resistance and robust design minimizes service needs. The required maintenance is only a cleaning in-place procedure if the heat exchanger is operating in a fouling duty. The highly turbulent flow helps reduce fouling and makes cleaning-in-place procedures more effective.

In addition to Tantalum Heat Exchangers, CrystalTCS regularly designs, engineers and fabricates the following types of custom Tantalum process equipment:
·         Pickling Heat Exchangers
·         Tantalum Bayonet Heaters
·         Tantalum Heat Exchangers
·         Tantalum Columns and Vessels



Crystal TCS Pvt. Ltd.
Give us call if you have need for unique Tantalum equipment at: +91 253 2501600
Visit us: http://www.crystaltcs.com/heat-exchangers-for-corrosive-applications.php


Labels:

Comments

  1. Galaxy ProcessJuly 31, 2019 at 10:02 PM

    Excellent and decent post. I found this much informative, as to what I was exactly searching for. Thanks for such post and please keep it up. Heat Exchanger Manufacturer in India | High Speed Disperser Manufacturer in India | Mechanical Circulator

    ReplyDelete

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more