Skip to main content

Tantalum Heat Exchangers Manufacturer in India


Tantalum Heat Exchangers Manufacturer in India

The ability of tantalum to resist severe corrosion makes it an ideal choice for heat exchangers with highly corrosive process fluids. Severe Corrosive environments involved in heating /boiling of corrosive acids in tanks can be comfortably handled by Tantalum Bayonet Heaters. We deal in various type of Heat Exchangers such as Shell and tube Heat Exchangers, Bayonet Type Heat Exchangers, Hairpin Exchangers, Tantalum Heat Exchangers.
CrystalTCS’s Heat Exchangers are used in the Chemical and process Industry and have ensured a long and stress free operation for our clients. We also supply custom made Heating / Cooling Coils to satisfy small heat duties and tank Heating Applications.

For heating with saturated steam, metal heaters have variety of advantages:

·         High operational safety
·         Small exchange areas due to high thermal conductivity
·         No restriction on the steam pressure, since the appearance will be matched to the duty

The metals used in heat exchangers for corrosion resistance are:

The construction, particularly of the larger units incorporates all the options needed for operational safety :

·         High-alloy stainless steels
·         Hastelloy
·         Titanium
·         Tantalum

Tantalum specially has the advantage that its corrosion characteristics mostly correspond to those of salt glass and is thus appropriate for inclusive use. Tantalum heat exchangers might be Bayonet or Shell and Tube type.

The components which readily fit into glass equipment:

·         Basket heaters
·         Coil heaters
·         Single-tube bayonet heaters
·         Multiple-tube bayonet heaters
Evaporator and Thermo Siphon Evaporators are frequently used for evaporation and distillation.
Tantalum heat exchanger consists of Tantalum tubes with Carbon Steel Shell. The construction consists of fully welded metal design. Tantalum is immune to thermal and mechanical shock. The tantalum heat exchangers have a life expectancy of about 7 to 8 years. A tantalum heat exchanger utilizes a completely welded metal design that has no gaskets to leak. The tantalum heat exchangers are usually subject to Dye Penetration for surface cracks detection, Hydro testing and in certain case Helium leak testing to check the equipment leakage. The tantalum heat exchangers will require cleaning after every 2 to 3 years.

Tantalum heat exchangers highly corrosion-resistant to:

·         Sulfuric acid
·         Hydrochloric acid
·         Bromines and their mixtures
·         Strong organic acids
·         Nitric acid
·         Phosphoric acid






For more details give us call at: +91 253 2501600
Visit us: http://www.crystaltcs.com/heat-exchangers-for-corrosive-applications.php
Our experts can also let you know if a different reactive alloy might be a better fit your application.

Labels:

Comments

  1. Galaxy ProcessJuly 31, 2019 at 10:00 PM

    Excellent and decent post. I found this much informative, as to what I was exactly searching for. Thanks for such post and please keep it up. Heat Exchanger Manufacturer in India

    ReplyDelete
  2. Galaxy ProcessJuly 31, 2019 at 10:01 PM

    This comment has been removed by the author.

    ReplyDelete

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more