Skip to main content

Industrial Tantalum Columns and Vessels Manufacture


Crystal TCS Pvt. Ltd is a company established in 2012 and based in Nashik, Maharashtra, India the Company is promoted by Directors having the rich and diverse experience of more than 30 years in the field of Capital Equipment and Engineering. Crystal TCS Pvt. Ltd suggests the sentiment of delivering a Human touch to our every relationship occupies a central place in the very values behind the foundation of our company and we always try to be up to it, be it in our interactions with our Customers, Suppliers, and Employees.
We deal in Tantalum Columns and Vessels constructed entirely out of Special Steel and Exotic metals, lined by Special Steel and Exotic metals and explosion bonded or explosion clad with Exotic metals.
Column Internals are supplied as per requirement and range from packing’s to Bubble cap trays.
The Columns are designed and manufactured as per the ASME / PED design.
Lined columns are equipped with a vacuum lined system to safeguard against internal vacuum.

Tantalum Columns and Vessels are suitable for applications in chemical processing, pharmaceutical, agricultural, fertilizer, petrochemical, and power industries. They are very effective in processes using salts, acids and other chemicals which can be damaging to lesser materials.

Tantalum Columns and Vessels
Tantalum Columns and Vessels


BENEFITS OF TANTALUM COLUMNS

A Tantalum column can be the most cost-effective solution to corrosion over the entire life cycle of the equipment.  Properly maintained, Crystal TCS Pvt. Ltd has Tantalum Columns that can operate for decades with little to no downtime.

Tantalum Columns can

  • Deliver many years of economical service life
  • Eliminate expensive process downtime due to equipment failure
  • Provide outstanding corrosion resistance
  • Provide excellent stress cracking resistance

A Tantalum column may solve many of the problems inherent with other materials of construction. It is not brittle and is not prone to cracking. Crystal TCS Pvt. Ltd Tantalum Columns are of a fully welded design and will not leak like lesser materials.

Tantalum Pressure Vessels


Tantalum Pressure Vessels should be considered for any application where corrosion is likely to be a factor and the long-term benefits of reduced downtime, increased life expectancy and profitability are important.

THEY ARE SUITABLE IN VERY CORROSIVE ENVIRONMENTS SUCH AS:
  • Hydrochloric acid
  • Sulfuric acid
  • Nitric acid
  • Strong organic acids
  • Bromine

Tantalum Pressure Vessels can

  • Eliminate downtime due to equipment failure
  • Provide superior corrosion resistance
  • Accommodate high steam pressures
  • Provide excellent stress cracking resistance
Crystal TCS Pvt. Ltd is globally known as an expert Tantalum Column and Vessels manufacturer, specializing in process equipment constructed from reactive metals. We at Crystal TCS Pvt. Ltd has performed intensive research and development for coming up with Industrial Tantalum Columns and Vessels Manufacture.

Contact us: 0253 2501600

Visit us: https://www.crystaltcs.com/process-columns-for-corrosive-applications.php


Labels:
Location: Surat, Gujarat, India

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more