Skip to main content

Manufacturers of Liquid Jet Ejectors in India

Crystal TCS Pvt. Ltd is a leading  Liquid Jet Ejectors Manufacturers and Suppliers. Our Liquid Jet Liquid Ejectors are used to suck liquids under vacuum and also to pump liquid to higher than atmospheric pressures. Liquid Jet Liquid Ejectors or Water Jet Ejectors are based on the Jet Venturi principle and utilize high-velocity liquid jets to suck liquid and pump it to the required discharge pressures. The maximum attainable vacuum is dependent on the vapour pressure of the Motive liquid while the maximum possible discharge pressure is dependent on the Pressure of Motive Liquid.

Liquid Jet Ejectors are simple in construction consisting of suction, Diffuser and Motive Nozzle. The operation of Liquid Jet Ejectors is based on high-velocity liquid emerging from the motive entraining air or gas in the suction housing and compressing it to atmospheric pressure. Easy to install. Minimum maintenance. Easy Operation. Crystal TCS Pvt. Ltd is a Liquid Jet Ejectors Manufacturers are specially designed to operate using water, solvent or any other clear liquid and generate vacuum corresponding to the vapor pressure of the liquid. They are very useful for applications when the expensive process fluid is to be recovered. They are most suitable for low non-condensable and high condensable loads in applications like distillation and evaporation.

Steam Jet-Liquid Jet Ejector systems to handle small quantities of non-condensable and non-condensable vapors and to scrub Gas also of outlet gases, its also available in various MOC for Batch and Continuous Application also. The ejector system is used in several industries Like OilPetro Chemicals, Vacuum Drying, Dehydration, Evacuation Vacuum Filling, Conveying, Venting.

Liquid Jet Ejectors Manufacturers
Liquid Jet Ejectors Manufacturers

How it works

Liquid jet ejectors are jet pumps, motivated by a high-pressure liquid. They use the kinetic energy of the pressure liquid to entrain gases and vapors, slurries and other liquids or granular solids and then discharge the resultant mixture against a counter pressure.

Advantages of our Liquid Jet Liquid Ejectors


  • Strong Corrosion resistance.
  • No Moving Parts – Reliable performance and very low maintenance requirements
  • Long Operating life
  • Silent Operation
  • Zero Vibrations
  • Compact size.
  • Compatible with Hazardous and Flammable environments
  • Design and Construction as per ASME, PED, AD 2000 Standards
  • U-Stamp and CE marking certification (if required)
  • Compliance with HEI, ABS

Crystal TCS is a best  Liquid Jet Ejectors Manufacturers

We are a company established in 2012 and based in Nashik, Maharashtra, India The company is promoted by Directors having a rich and diverse experience of more than 30 years in the field of Capital Equipment and Engineering.

The company has committed itself to strive continuously for technological excellence and puts a great emphasis on delivering quality products and services.

As our tagline suggests, the sentiment of delivering a Human touch to our every relationship occupies a central place in the very values behind the foundation of our company and we always try to be up to it, be it in our interactions with our Customers, Suppliers, and Employees.

Find here information about Liquid Jet Ejectors selling for your buy requirements. Contact verified Liquid Jet Ejectors Manufacturers.

Contact us: 02532501600
E-mail: info@crystaltcs.com
Visit us: https://www.crystaltcs.com/liquid-jet-liquid-ejectors.php


Labels:
Location: Mumbai, Maharashtra, India

Comments

Post a Comment

Popular posts from this blog

Vapour Recovery Systems-Manufacturers & Suppliers in India

Vapour recovery systems are designed to recover Vapours from gas or different fuels so these gases don't escape into the atmosphere. they're utilized in the chemical action and crude oil industries to recover escaped Vapours for either recycle or destruction (usually by combustion) Vapour Recovery Unit Features Using their a few years field administration experience, CrystalTCS have built their systems to include distinctive style options that exceed business desires – these include; A Vapour recovery unit, could be a compression system used to collect and compress low volume gas streams for injection into the suction of a bigger compressor, a meter run, a local site fuel installation or directly into a gas gathering line. Mechanical Vapour recovery unit contains a driver motor or engine that provisions the facility to the compressor. They’re typically utilized by oil and gas operations to recover vent gas. Typical Applications: Vapour Recovery System ·    
2 comments
Read more

Loop Reactor: Advancing Continuous-Flow Chemical Reactions for Efficient and Scalable Production

    Loop Reactors are revolutionizing the way chemical reactions are performed in the industry. They have been in use for many years and are becoming more prevalent as they offer many advantages over traditional batch reactors. In this article, we will discuss Loop Reactors in detail, including how they work, their benefits, and their applications. What is a Loop Reactor? A Loop Reactor is a type of continuous-flow chemical reactor used to perform chemical reactions. The reactor consists of a loop-shaped tube with a high-speed impeller located inside the loop. The impeller generates high shear forces that promote mixing of the reactants and enhance the mass transfer of reactants and products within the reactor. The loop-shaped design also allows for efficient heat transfer, ensuring that the reaction temperature can be tightly controlled. How Does a Loop Reactor Work? Loop Reactors work on the principle of continuous-flow chemical reactions. The reactants are continuously fed into the
Post a Comment
Read more

Tantalum Heat Exchangers for Highly Corrosive Applications

Tantalum Heat Exchangers for Highly Corrosive Applications In order to achieve optimum process operations, it is essential to use the right type of process equipment in any given process.  Heat exchangers, commonly used to transfer energy from one fluid to another, are no exception.  Tantalum is the most corrosion resistant metal in common use today. It is inert to practically all organic and inorganic compounds. Its corrosion resistance is very similar to glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications.  For this reason, Tantalum is often used with glass lined steel Reactors as patches, Dip Tubes, Piping and Overhead Condensers. CrystalTCS offers a full line of standard and custom designed shell and tube heat exchangers for acids or highly corrosive media operations. Tantalum, the inert material for most acids and highly corrosion areas, when machined/ rolled and fabricated into heat transfer equipment increases the life and du
1 comment
Read more